Professional Beverage Production Line
It’s a complete system used to produce carbonated drinks. It contains sugar melting tank,
syrup filter, cooling tank, carbonated beverage mixer, water chiller and so on. Depend on your different formulations, Customizes machines are available .
Plate Heat Exchanger
Beverage CO2 Mixer
3HP ~ 200HP
Material 35℃→4℃ ice water 1℃ flow rate 4：1
It can mix syrup, additives, water and CO2 into finished beverage before bottling.
Gas content: 1.5-2.5，>2.5
Water deoxidization mathod：
1.Deoxidized by CO2
2.Deoxidized by vacuum system
Washing filling capping 3-In-1 Machine
This three-in-one machine for PET bottle integrates the functions of rinsing, filling and capping together.
Based on advanced technology overseas and designed according to the filling processing demands of carbonated beverages. It’s used for 200-2000ml plastic bottles.
Make bottles be cleaned completely to grip the bottle neck, rotate filling plate, inverse bottle , internal rinsing and external spraying.
With imported special efficient spray nozzle, the washing water will be sprayed in a particular angle, can wash any part of the inner wall, rinse with water thoroughly and save flush bottle.
Washing part moves by a frame in the transmission system through the gear transmission.
Filling method is gravity filling with holding bottle neck ,
the special back flow type of the filling valve can avoid leakage after filling and also control liquid level accurately.
The filling with wishing and capping is connecting with the thumbwheel card bottleneck transportation methods.
The bottle which has finished filling will enter the capping position via the driving wheel. The photoelectric detection of the detecting signal detects the bottle, send a message to the valve cover, the cylinder cap will open, the caps will be blew into the cover plate by compressed air.
Its working process can be divided into 3 stages, circulating hot eater spraying, warm water pre-cooling.
Temperature and time of cooling can be regulated according to the requirements of user.lt is suitable for cooling/heating all kinds of bottled or canned hot beverage and aerated beverage.cooling time(min)：12-15min
warm temperature(℃): 37-45