2000BPH Semi-automatic 4 Cavity Stretch Blow Molding Machine for 200ml-2L PET Bottle

Suitable for all shapes of PET plastic bottles, widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc
√√ Brand: Reliable Machinery-----Semi-Auto Blowing Machine
√√ Application:200ml-2L
√√ Capacity:2000BPH

Brief introduction

Suitable for all shapes of PET plastic bottles, widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc
√√ Brand: Reliable Machinery-----Semi-Auto Blowing Machine
√√ Application:200ml-2L
√√ Capacity:2000BPH
√√ Warranty:2 Years
√√ Imported SIEMENS PLC Control, accurate operation
√√ Vertical factory price sale, easier operation; fixable; cost-effective production
√√ Stable and reliable, independent construction design shorten the blowing process

   Semi automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles. It is widely used to produce the carbonated bottle ,mineral water,carbonated drink bottle, pesticide bottle oil bottle cosmetics,wide-mouth bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.

   The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. Simple installation & start-up adjustment.

   This Semi automatic bottle blow molding machine can reduce the Waste rate of finished bottle less than 0.2%. The main system of this  Semi-automatic machine is controlled by PLC system, with easier operation and better practice experience. 

Features

1. Produce bottle from 0.2L to 2L
2. Output capacity: 2000bph- 0.5L, 4-cavities blow mold
3. New version in 1 heater oven and 1 blower, the area of machine settlement is reduced. easier operation for operator, no need too much movement.
4. Advanced PLC control system with a use-friendly panel and time-control precision of PLC, up to 0.01second,Double start working buttons, which is designed for avoiding the injury.
6. Independent Temperature Control for different heating lamp to get ideal preform heating
7. Heating lamps are adjustable in directions to suit various preforms.
8. One Operator needed and no need extra training.
9. Simple installation & startup adjustment.
10. Energy Saving--low investment--easy to operate and safety

11.The machine frame is produced by the whole complete casting bottom, so that the machine is firm and running stable.

12.The stretching air cylinder is adjusted parallel from front to back, from left to right freely by regulator.

 

Flow

 

The preform will be heated evenly, not influenced by outside environment. to keep the temprature stable and accurate,Which is the key to the production of bottle making.Adopt special electronic controlling circuit for heating, with higher efficiency, low power consumption.suitable for different kinds of perform.

Heater PART

Short mould stroke,quick action. Wide adaptability, suitable for every type mould thickness. the blowing process is to stretch the preform to be a bottle, Special design,high rigid compound die structure,action smoother and precision operation.

Blower PART

With a use-friendly panel and time-control precision of PLC up to 0.01second. Independent Temperature Control for different heating lamp to get ideal preform heating results.

Advanced PLC Control

Equipped with special designed accessories parts, including compressor,air tank, air filter, chiller and cold water freezer. 
All these equipment are available as in package.

Auxiliary Equipment

Technical Parameters

Model

RM-2000A

Container

Product material

PET

Volume

0.2L-2.0L

Theoretical output

1800-2000PCS/H

Preform length

15mm-400mm

Preform inner diameter

10mm-160mm

Moulding

Max.mould plate Dimension(L x W)

400x460mm

Max.mould thickness

300mm

Clamping force

65KN

Mould opening stroke

38mm

Machine size and weight

Main machine (L x W x H)

163*62*159cm

Main machine weight

650Kg

Heater (L x W x H)

178*57*138cm

Heater weight

350Kg

Power

17.5kw

 

Solutions

Water

Juice/Tea

Carbonated Drinks

Oil

Wine

Protein Drinks

Bottle Blower / Water Treatment / 3 in 1 Filling Machine / Labeling
Ink-jet Printer / Packing / Injection Molding Machine

Blowing Machine
Sugar Melting Tank
Mixing Tank
Mixing Tank
Softener
Active Carbon Filter
Sand Filter
RO Water Treatment
Filling Machine
Cap Up-loader
Labeling Machine
Bottle Dryer
Film Wrapping Machine

Reliable Service System

High quality service process, create maximum value for you and your factory

Establish connection & joint hands

Reliable feasibility analysis

Attention to details & project process design

Closely tracking on production progress

Full set after-sales & installation adjustment

Continuous service & customer first

One-stop purchasing service

Reliable promise

Learn more

We are always committed to solving all your
doubts and providing one-stop purchasing solutions!

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message