Copyright © 2022 ZhangJiaGang Reliable Machinery Co., Ltd. All Rights Reserved.Site Map
This glass bottle beer filling machine is suitable for packing water, beer or gas containing beverage, wine or other liquior.
3000BPH Fully Automatic Complete Glass Bottle Alcohol Drink Filling Machine ( Washer filler capper )
Production Introduction
The series of products can meet the filling-sealing requirement of different sealing manners for capper,popcan capper,screw capper etc,and can be applied to water,carbonated soft drink ,fruit juice,coffee drinks,protein drinks,beer,rice wine and so on ,with domestic technology leading level .
The machine adopts the advanced international technology.The design is scientific and resonable,appearance is beautiful ,operation and maintenanc are convenient.and it is with high degree of automatization.
Detailed Introduction Show
Washing part
>>When the clamp rotate to star wheel with rotating table, bottle into the middle of clamp, open clamp cam close the clip claw and clip the bottleneck with the rotating clamp. When rotary tables to rotate, clamp pieces will rotate with over turn cam, guide cams rotates around over turn cam and flip the bottleneck to 180 degree till the bottle mouth is top downwards and directly face the spray nozzle, then the clean water in the spray nozzle sprays and wash the inside of the bottle, Drain, turn 180 degree downwards and then goes out from the star wheel. | |
Filling part >>It is made up of main liquid pipe, rotating cylinder bearing base, filling cylinder fulcrum loop, wine or carbonated drink tank, filling valve, filling cylinder pipe, control loop device, ascending device, the distributor, height adjusting control, stimulating bubble arm, vacuum system, etc. >>Glass bottle filling machine is specially designed according to the beer feature, and the filling part is designed to be twice pre-evacuation | |
Capping part --- Crown Cap Capping Part --- Aluminum cap >>It is made up of cap holder, capping sildeway, capping upper part, capping lower part, elevating part and anti-circling column.
>>The up and down movement of the capping nozzle is driven by the capping cam, which is fixed. The crown caps are sending to the cap sildeway by a mixer in the cap container, and then slid to the capping mould of the capping nozzle. |
Characteristics
1. Using the wind sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottleneck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough..
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.
4. High-speed large gravity flow valve filling valve, filling fast, filling accurate and no liquid lose.
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan\'s Mitsubishi, France Schneider, OMRON.
Technical Paraments
Item | CGF-C/S12-12-6 | CGF-C/S18-18-6 | CGF-C/S24-24-8 | CGF-C/S32-32-8 |
Capacity | 2000bph(500ml) | 4000bph(500ml) | 6000bph(500ml) | 8000bph(500ml) |
Rising heads | 12 | 18 | 24 | 32 |
Filling heads | 12 | 18 | 24 | 32 |
Capping heads | 6 | 6 | 8 | 8 |
Bottle Diameter | Commonly 50-100mm (can adjustable) | |||
Bottle Height | Commonly 150-310mm(can adjustable) | |||
BOTTLE | Glass | |||
Rising pressure | 0.2-0.25Mpa | |||
Overall size | 2130*1700*2350 | 2450*1800*2350 | 2780*2200*2350 | 3600*2650*2350 |
Weight | 3.3t | 3.5t | 4.5t | 5.5t |
Suitable cap shape | Cork,crown cover,aluminum screw cap28 or 30 mm |