4000 BPH Full Automatic 200-2000ml PET Bottle Blowing Machine

Suitable for all shapes of PET plastic bottles,widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc
√√ Brand: Reliable Machinery-----Automatic Blowing Machine
√√ Application:0.2-2L
√√ Capacity:4000BPH

Brief Introduction

Suitable for all shapes of PET plastic bottles,widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc
√√ Brand: Reliable Machinery-----Automatic Blowing Machine
√√ Application:0.2-2L
√√ Capacity:4000BPH
√√ Warranty:2 Years
√√ Imported SIEMENS PLC Control, auto load preform
√√ Low cost, high efficiency; easier operation; fixable; advanced technique process
√√ Stable and reliable, independent construction design shorten the blowing process
√√ Flexible function change between automatic and semi-automatic blowing machine

The full automatic bottle blowing machine professionally produced by Reliable Machinery has advantages of high speed, good quality, high efficiency, better price performance and simple operation. Suitable for producing PET plastic containers and bottles in all shapes,  It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

Produce bottle type is from 200ml to 2000ml . These blow molding machines are convenient and fast, have large molding capacity and are widely used in many industries.

Advantages of RM-4000 plastic blow molding machine

1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: less than 0.2 percent

 

Features

The cast-molded clamping table not only has high durability and small deformation, but also improves the stability of the machine. Engineering software analyzes and optimizes the clamping system to ensure fast movement and superior rigidity. Clamping unit with high pressure compensation design guarantees perfect final PET bottle quality.

CAST IRON CLAMPING UNIT

The double cylinder stretching unit is standard equipment of the machine, which ensures fast stretching and long stretching distance. Linear slides make the stretching action smoother and faster.

STRETCHING SYSTEM

The patented preform separation unit ensures the compatibility of the machine for bottles of different specifications, and at the same time helps the machine to improve the production speed of blowing.

PATENT DESIGNED SPACING UNIT

The advanced air circulation heating design can keep the temperature accurate and uniform, which is the key to the production of high-quality plastic bottles. In a specially-designed oven, the lamps can be adjusted to a horizontal or vertical position, ensuring that the drying tunnel can accommodate preforms of various sizes.

INFRARED HEATING SYSTEM

Technical Parameters

Type RM-4000  
Output According to bottle type 4000PCS/H@500ml
Product specification Bottle diameter 20mm-100mm
Bottle height 50mm-350mm
Bottle mouth diameter 15mm-38mm
Mold Cavities 4cavities
Mold thickness 200mm
Mold effective area 500*500mm
Main power Power 380v   3Phase    / 220v   3Phase 50/60HZ
Install power/actual power 49kw/10kw
Air source Low pressure air compressor 1.2m3/min 1.0MPa
High pressure air compressor 2.4m3/min 3.0MPa
Cold dry machine 2.0m3/min 3.0MPa 1set
Cooling water Cooling water quantity 15L/min
Main machine size Length width height/weight 2308*2058*1920mm/3600kg
Preform loader size Length width height/weight 2000*950*2480mm/250kg

 

Application Range

 

RELIABLE Design Case

 

Process Flow Chart

 

Solutions

Bottle Blower / Water Treatment / 3 in 1 Filling Machine / Labeling
Ink-jet Printer / Packing / Injection Molding Machine

Blowing Machine
Sugar Melting Tank
Water Tank
Water Tank
Softener
Active Carbon Filter
Sand Filter
RO Water Treatment
Filling Machine
Cap Up-loader
Labeling Machine
Bottle Dryer
Film Wrapping Machine

Reliable Service System

High quality service process, create maximum value for you and your factory

Establish connection & joint hands

Reliable feasibility analysis

Attention to details & project process design

Closely tracking on production progress

Full set after-sales & installation adjustment

Continuous service & customer first

One-stop purchasing service

Reliable promise

Learn more

We are always committed to solving all your
doubts and providing one-stop purchasing solutions!

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message