Full Automatic 20000BPH High Speed Servo Control PET Bottle Blowing Machine

Suitable for all shapes of PET plastic bottles,widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc
√√ Brand: Reliable Machinery-----Automatic Blowing Machine
√√ Application:0.2-2L
√√ Capacity:20000BPH

Introduction

PET plastic has good optical properties and weather resistance, with excellent wear resistance and friction properties, the bottle made has strong transparency, non-toxic, impermeable, light weight, and is widely used in the food and beverage packaging industry. According to the type of products you package, to provide you with more suitable packaging equipment and solutions.

> The heating system adopts air extraction and temperature box to maintain constant temperature, and the heating process is more stable.
> High pressure recovery system can be selected, without the need for a separate low pressure, thereby reducing procurement costs and operating costs.
> The servo system reduces energy consumption and noise emissions, greatly improving the production speed, product quality and service life.
> Use the computer console, one-click start, easy to operate, easy to understand, no professional and technical personnel can easily control.

Parameter

PRODUCTION DATA

RM-9

Maximum diameter of product (MM)

103

Product bottle mouth size (MM)

18-38

Maximum product height (MM)

250

Suitable for maximum height of embryo tube (MM)

165

Closing stroke (MM)

125

Die stroke (MM)

50

Bottle spacing (MM)

110

Design capacity (bottles/hour)

20000bph

Number of die cavities

9

Heating unit

9

Number of heating lamp layers

9

Number of embryonic tubes

156

voltage

380v

frequency

50/60hz

Working power

32-42kw/h

Installed power

108kw

Low pressure compressed air pressure

1Mpa

Low pressure compressed air consumption

1.0m3/min

High pressure Compressed air pressure

3.0Mpa

High pressure compressed air consumption

12.0m3/min

stress

2-4bar

Flow rate

6m3/h

Weight of Main machine, heating machine, electric control box, etc

7500kg

Main machine (L×W×H)

5000*2300*2900

Finishing machine (L×W×H)

2950*2120*3200

Features

  • Bottle Blowing Machine

    The whole machine is equipped with lubrication system without manual addition, and the self-service supply cycle can be set according to different needs.Shaft system adopts special lubrication system, no need to frequent refueling, reduce maintenance time, make the equipment more clean and hygienic.

  • Preform entry system

    single path preform entry, star wheel preform entry, effectively solve the problem of wear between card preform and bottle preform.

  • Preform organizing system

    closed hopper storage and bottle preform lifting can reduce the contamination of the bottle preform twice. The bottle preform reflux device is used to solve the problem of stuck preform in the process of preform preparation. Adjustable speed motor is used in the upper and finishing parts, which can be flexibly set at the speed matched by the equipment capacity. The part in contact with the bottle preform shall be made of stainless steel and magnesium aluminum to avoid contamination of the bottle preform.

  • Preform feeding system

    Using single pass preform, low cost, convenient maintenance. Avoid the phenomenon of grinding and sticking on the surface of bottle preform. Servo motor preform more accurate and fast. Effectively solve the problem of misalignment of dividing germ. Automatic manipulator claw preform, optical fiber positioning, accurate and fast preform.

  • Pull and blow system

    one blow, two blow cycle time can be adjusted, according to the customer's different tube preform and different bottle type each rod can be adjusted separately, high flexibility.

  • Automatic heating system

    The use of rotary blowing machine mode heating and conveying, can reduce energy consumption, greatly improve the speed and quality of heating.

More Details

Certificate

Application and Design

 

Our bottle blowing machine can produce all different kinds of bottles like square bottles,flat bottes and so on. and it usually suitable for water bottles,juice bottles, carbonated drinks bottles,oil bottles and so on.

  

Process Flow Chart

Preform→Preform storing parts→Preform heating(temperature adjustment) →(Pull stretch→Blow air→ Release Air→ Blow pin and mouth at same time→Close the blow mouth→Forming)→Finished

 

RELIABLE Design Case

Turn-Key project with exclusively designed tailor-made solution and also highly flexible and credible customized services.

 

Reliable Service System

High quality service process, create maximum value for you and your factory

Establish connection & joint hands

Reliable feasibility analysis

Attention to details & project process design

Closely tracking on production progress

Full set after-sales & installation adjustment

Continuous service & customer first

One-stop purchasing service

Reliable promise

Learn more

We are always committed to solving all your
doubts and providing one-stop purchasing solutions!

*Name
*Email
Company Name
Tel
*Message
×

Contact Us

×

Inquire

*Name
*Email
Company Name
Tel
*Message