Full Automatic 6 Cavity Servo Motor Blow Molding Machine

Suitable for all shapes of PET plastic bottles,widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc
√√ Brand: Reliable Machinery-----Automatic Blowing Machine
√√ Application:0.2-2L
√√ Capacity:6000BPH

Brieft Introduction

Suitable for all shapes of PET plastic bottles,widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc
√√ Brand: Reliable Machinery-----Automatic Blowing Machine
√√ Application:0.2-2L
√√ Capacity:6000BPH
√√ Warranty:2 Years
√√ Imported SIEMENS PLC Control, auto load preform
√√ Low cost, high efficiency; easier operation; fixable; advanced technique process
√√ Independent construction design shorten the blowing process
√√ Flexible function change between automatic and semi-automatic blowing machine
√√ Servo transfer system, accurate position, high speed, stable and reliable

The automatic bottle blowing machine professionally produced by Reliable Machinery has advantages of high speed, good quality, high efficiency, better price performance and simple operation. Suitable for carbonated drink bottles, gas beverage bottles, pure water bottles, mineral water bottles, juice beverage bottles, cosmetic bottles, large diameter bottles, high temperature resistant bottles and other packaging containers of any shape.

Produce bottle types including 330ml-550ml, 500ml-750ml, 1000-2000ml and so on. RM series blow molding machines are convenient and fast, have large molding capacity and are widely used in many industries.

Advantages of RM-6000D plastic blow molding machine

1. With advanced PLC control system, the performance is stable and outstanding.
2. Automatic feeding of conveyor belt.
3. The heat penetration is strong and the preform receives even heat with self-rotating during the preheating process.
4. This series of bottle blowing equipment is highly adaptable. By adjusting the distance between the lamp tube and the reflector, the preform can fully absorb heat. Equipped with an automatic constant temperature device, the temperature can be maintained within a certain range.
5. There is a safety locking device during each mechanical action to protect the operator's safety.
6. Use air cylinder instead of hydraulic cylinder, less pollution and low noise.
7. Use different air pressure for blowing and machine operation, energy saving and environmental protection.
8. Equipped with high pressure and double crank connecting rod clamping to provide high clamping force.
9. with automatic and manual operation.
10. Safe, reliable and unique valve position design makes the blowing process easier to control.
11. The blowing machine has the characteristics of low cost, high efficiency, easy operation and maintenance, and advanced automatic process.
12. Avoid contamination of the bottle.
13. Protection of low temperature cooling system.
14. Easy to install and start.
15. Low scrap rate.

 

Features

The cast-molded clamping table not only has high durability and small deformation, but also improves the stability of the machine. Engineering software analyzes and optimizes the clamping system to ensure fast movement and superior rigidity. Clamping unit with high pressure compensation design guarantees perfect final PET bottle quality.

CAST IRON CLAMPING UNIT

The double cylinder stretching unit is standard equipment of the machine, which ensures fast stretching and long stretching distance. Linear slides make the stretching action smoother and faster.

STRETCHING SYSTEM

The patented preform separation unit ensures the compatibility of the machine for bottles of different specifications, and at the same time helps the machine to improve the production speed of blowing.

PATENT DESIGNED SPACING UNIT

The advanced air circulation heating design can keep the temperature accurate and uniform, which is the key to the production of high-quality plastic bottles. In a specially-designed oven, the lamps can be adjusted to a horizontal or vertical position, ensuring that the drying tunnel can accommodate preforms of various sizes.

INFRARED HEATING SYSTEM

Technical Parameters

Type RM-6000  
Output According to bottle type 6000PCS/H@500ml
Product specification Bottle diameter 20mm-100mm
Bottle height 50mm-350mm
Bottle mouth diameter 15mm-38mm
Mold Cavities 4cavities
Mold thickness 200mm
Mold effective area 500*500mm
Main power Power 380v   3Phase    / 220v   3Phase 50/60HZ
Install power/actual power 49kw/10kw
Air source Low pressure air compressor 1.2m3/min 1.0MPa
High pressure air compressor 2.4m3/min 3.0MPa
Cold dry machine 2.0m3/min 3.0MPa 1set
Cooling water Cooling water quantity 15L/min
Main machine size Length width height/weight 3700*2150*2150mm/5500kg
Preform loader size Length width height/weight 2350*1350*2650mm/550kg

 

Application Range

 

RELIABLE Design Case

 

Blowing Moulds

Solutions

Bottle Blower / Water Treatment / 3 in 1 Filling Machine / Labeling
Ink-jet Printer / Packing / Injection Molding Machine

Blowing Machine
Sugar Melting Tank
Water Tank
Water Tank
Softener
Active Carbon Filter
Sand Filter
RO Water Treatment
Filling Machine
Cap Up-loader
Labeling Machine
Bottle Dryer
Film Wrapping Machine

Reliable Service System

High quality service process, create maximum value for you and your factory

Establish connection & joint hands

Reliable feasibility analysis

Attention to details & project process design

Closely tracking on production progress

Full set after-sales & installation adjustment

Continuous service & customer first

One-stop purchasing service

Reliable promise

Learn more

We are always committed to solving all your
doubts and providing one-stop purchasing solutions!

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message