Brief introduction
√√ Brand: Reliable Machinery-----Semi-Auto Blowing Machine
√√ Application:5gallons
√√ Capacity:150BPH
√√ Warranty:2 Years
√√ Imported SIEMENS PLC Control, accurate operation
√√ Vertical factory price sale, easier operation; fixable; cost-effective production
√√ Stable and reliable, independent construction design shorten the blowing process
Semi automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles. It is widely used to produce the carbonated bottle ,mineral water,carbonated drink bottle, pesticide bottle oil bottle cosmetics,wide-mouth bottle etc. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles. Simple installation & start-up adjustment.

Features
1.Adopt the new type double bend arm and four pull rod-clamping structure (won the patent). Cross direction; middle mould board is move parallel; the distance between two mold bases is adjusted by the chain wheel. Thus, the clamping force is very strong.
2.The machine frame is produced by the whole complete casting bottom, so that the machine is firm and running stable.
3.Adopt the straight slide way, reduce the friction and lengthen the life of the machine.
4.Double start working button, which is designed for avoiding the injury.
5.Power saving design that can increase your profits.
6.The single direction of pre-form placing and bottle picking, which increase the output.
7.Segregate type air controlling system, which is designed for avoiding waste pollution.
8.The stretching air cylinder is adjusted parallel from front to back, from left to right freely by regulator.
Flow

The bottle embryo is irradiated by infrared high temperature, the body of the bottle embryo should be heated and softened. To keep the shape of bottle neck. The bottle neck embryo does not need to be heated. Therefore, a cooling device is required to cool it.

Place the preheated bottle embryo into the prepared blow mold, inflate it with high pressure during the period, and blow and pull the bottle embryo into the required bottles.

With a use-friendly panel and time-control precision of PLC up to 0.01second. Independent Temperature Control for different heating lamp to get ideal preform heating results.

Equipped with special designed accessories parts, including compressor,air tank, air filter, chiller and cold water freezer.
All these equipment are available as in package.
Technical Parameters
Model |
RM-25L-A |
|
---|---|---|
Container |
Product material |
PET |
Volume |
20L |
|
Theoretical output |
100PCS/H |
|
Preform length |
15mm-460mm |
|
Preform inner diameter |
15mm-200mm |
|
Moulding |
Max.mould plate Dimension(L x W) |
420x500mm |
Max.mould thickness |
400mm |
|
Clamping force |
3300Kg |
|
Mould opening stroke |
330mm |
|
Machine size and weight |
Main machine (L x W x H) |
163*62*159cm |
Main machine weight |
1000Kg |
|
Heater (L x W x H) |
242*65*160cm |
|
Heater weight |
380Kg |
|
Power |
30kw |
Solutions
Bottle Blower / Water Treatment / 3 in 1 Filling Machine / Labeling
Ink-jet Printer / Packing / Injection Molding Machine














Reliable Service System
High quality service process, create maximum value for you and your factory

Establish connection & joint hands

Reliable feasibility analysis

Attention to details & project process design

Closely tracking on production progress

Full set after-sales & installation adjustment

Continuous service & customer first

One-stop purchasing service

Reliable promise